Mag Release Glock - GLOCK® is hot with the latest additions to its Slim Line series of bolt-action pistols. What started with the Glock®G43 as one of the most popular 9mm EDCs has been greatly expanded with the G43X and the new G48. The compartment capacity has been increased, keeping the package as small as possible for smart transport. We couldn't resist giving these pistols the same magazine release we created for the first models of the Slim Line.
The GMR-007 has all the features that have made the GMR series one of the most sought after GLOCK® upgrades. No more changing your grip to get the undersized control from the factory and still provide good performance regardless of finger size or height. Made from the same bulletproof material used in all previous GMR models, the unique design prevents unwanted magazine release when placed on a hard surface. Ambidextrous.
Mag Release Glock
Disclaimer: "GLOCK" is a registered trademark of GLOCK, Inc. and is one of the many trademarks of GLOCK, Inc. or GLOCK Ges.mbH. No, if this website is in any way affiliated with or endorsed by GLOCK, Inc. or GLOCK Ges.mbH. The use of "GLOCK" on this page is only to advertise the sale of GLOCK parts or components. Genuine GLOCK, Inc products and parts. and GLOCK Ges.mbH, visit www.glock.com. It's easier to install, slightly wider and much longer than the OEM mag version. I put it on my G17 Gen4 with a medium backstrap. Before installing this extended release, I had to break my grip to trigger the magnetic release (I held the gun very high close to the bore axis). With this product, I don't have to. Note to self: add loctite to two screws if they are loose. So far it's been really strong. As usual, super fast delivery, thank you.
Click Here To Buy The Ryg Extended Magazine Release
Installed on G19X and G17 Gen4. Easy to install. The extension facilitates magazine release, especially on the 19X. With this extension I can eject the magazine with my finger without changing my grip. Great addition and doesn't mess up my holster anymore.
It's a great knob for quick changing the mag, especially for those of us with big hands who have trouble pressing the factory release. This item is a must have addition to any Glock!
This is a great product. The Mag Release polymer is drawn to accept the aluminum extension. I was worried about it, but it fits perfectly, looks great, and I haven't had any issues yet. If the tab isn't done, you still have the normal polymer button below so it will still work.
I am very happy with mine. The magazine closure is strong and nice and the extension fits my finger perfectly. There is no tilt when the mag is installed; fit and finish well. The reason I bought mine was because I wanted to release the magazine without changing my grip and this was perfect for my medium to large size hands and thick fingers. I would buy one if GS released one with a more aggressive plaid.
Glock Gen4/5 Extended Magazine Release
First, the button was drilled through the center, so when pressed it would engage the frame, without ejecting the magazine. Since it wasn't a big deal, I sanded the bottom to make it fit. This brings up the second problem, after taking the belt out three times I could feel that one of the screws was not holding tight.
To be honest, I didn't contact the Glock store about this, but I'm sure they would fix it.
I just received my order and immediately installed the extended mag launch on my Glock 19. It took less than 10 minutes! I have to say, I wasn't sure until I tried it. This extended magazine release is fantastic! I have carried this gun for 4 years now and for the first time I can do a magazine change easily. A great addition to my favorite cherry shot. I recommend it.
One thing I hated about the Glock was the ergonomics of the magazine release. It drove me crazy because I don't want to fix my grip on life or death. I found a cheap extended release and it sucked. So I bought this teardrop model. I have to admit the overall amount was high for the item and some additional relief I received. All work is complete. I honestly couldn't have asked for a better ergonomic design to boot from the factory. I can't comment on the holster release part. I use it as my nighttime weapon. I keep it next to me when I'm at home so it's never in the holster. I have some of those weapons. I recommend this section. A huge improvement in my overall satisfaction with the Glock 19.
Odin Works Extended For Glock Magazine Release
Be careful. It can be a problem with some holsters. I have a G26 with an N82 Revnant IWB holster. If I lean back in the right chair, he will take out the magazine for me.
I really like it, so I read this to start a magazine, which has this little section! But know that it is not an illegal IDPA unless it is filed to fit the frame hole!
Everything came as it should. It's bigger than I expected and comes out a quarter of an inch lower. However, it is very effective, there is no need to adjust the handle or even go far to the target, the main product
This was the best release I could find on the market. I have never installed one. It took a few minutes to install and it was perfect. I watched the installation video several times before installing it. Thank you
Vickers Tactical Gen4 .45acp/10mm Extended Magazine Release
I called out the teardrop of my G41. Installation was easy. I like the look and the color (red). However, my issue is that it stands out, far from me. I will return that and get the same magnified Mag grip, which I have on my 19X (and I LOVE IT!).
I bought it for my Glock 9 x 19 gen 3. It works perfectly and makes dropping the magazine easy without adjusting the grip. Note that the spring is very stiff and less likely to turn off, but not bad if you have the right tool. I used a toothpick with an L-shaped bend at the end and it made it easier.
The original magazine release is small for my hands, making me change the grip to release the magazine. With this, changing magazines is no longer a problem. It sticks out a little so it's easy to reach with a finger and there's no need to change my grip. The button has some rough edges, so the handling is rough. This can cause some problems for those who hide, as the button protrudes slightly.
I'm not using Loctite on the screws because I'm trying to find some silver screws.
Tyrant Designs Extended Magazine Release For Glock Gen4/gen5
This magnetic release is mounted on a g26 slide with a p80 frame. The reason I chose the teardrop release over the magnetic release is because the G26 P80 frame has extra protrusions for grip, and the plastic-shaped teardrop grooves on the frame match the teardrop release button perfectly!
Another thing to note: this button sticks out enough to make most holsters ineffective, however, Mr. Gill has a few holsters here that take this into account and have been cut down to allow for the $35 and $30 holster withdrawals.
To remove the magazine catch spring, I used angled forceps with one of the jaws bent inward, but I've heard that toothpicks or other types of hemostats work just as well.
The nice formal setup makes it easy to drop magazines and fast too. it is not very stable Conseal is possible. The only annoying thing is how sharp the edges are, if they were rounded a bit it would go a long way. I recommend this buyer.
Review: Tangodown Glock Gen4 Magazine Catch
It's a quality product, but it has to be said that the button is too big, it has increased the release of the mag. Even when compressed, it's nowhere near the P80's full-size frame. Easy installation and large size, very suitable for any type of transport. Fortunately, that was not the purpose of this construction. Zev Technologies&trade has added a Glock® magazine release that is easy to install and is made from billet aluminum and hard anodized. This magazine release is a must have for any Glock® owner. CNC aircraft type billet aluminum. Mag-release anodized black body. Color button face. Hard black anodized knob or silver non-anodized knob. Get down in position. ZEV parts always have design, feel and performance.
I originally purchased this product from a glockstore and have since returned it twice, once because the screws weren't snug and wouldn't tighten and twice because it was too clipped and wouldn't release the magazine. This product is a little more expensive than others, but that's because of the quality you get
Glock mag holder, molle glock mag pouch, vickers glock extended mag release, glock mag release spring, glock 21 mag release, glock gen 3 mag release, glock 19 extended mag release, glock extended mag plate, glock 30 mag extension, glock extended mag release install, glock 33rd mag pouch, best glock extended mag release